Model Overview & Print Notes

This is a detailed version of the Titanic's single and double ended scotch boilers. Of the Titanic's 29 coal-fired boilers, five were single-ended Scotch marine boilers, while the other 24 were double-ended. The primary difference was that single-ended boilers had furnaces at only one end, while double-ended boilers had furnaces at both. This model would be perfect for wreck models, debris field models or just on display for education purposes. This file can be printed at any size SCALING Original size of single boiler 11ft 9inches with the diameter of 15ft.9inch If printing in 1/200 scale, scale along the length to the size of 18.1356 mm. The height and width needs to both be 24.2316mm If printing in 1/400 scale, scale along the length to the size of 9.0678 mm. the height and width need to both be 12.1158mm DOUBLE ENDED SCALE SCALING Original size of double boiler 20ft length with the diameter of 15ft.9inch If printing in 1/200 scale, scale along the length to the size of 30.48 mm. The height and width needs to both be 24.2316mm If printing in 1/400 scale, scale along the length to the size of 15.24mm. the height and width need to both be 12.1158mm Created using Nomad Sculpt. ## 3D Printing Settings Needs to be printed in resin for high detail.