SKEP | Pendant Light E27 fast print

Model Overview & Print Notes

**SKEP | Pendant Light E27 fast print** **Want to buy a physical 3D print of this product? Head to [Trajann online store](https://trajann.com/collections/chr-design).** Give your space a radical modern and stylish vibe with this **fast-print pendant light** exploring 3D printing **weaving techniques**! It's 100% print-in-place without any supports. Any 3D printer can print it without exceptional print settings and a regular 0.4mm nozzle. (See settings below) You can get the power cords from Amazon here: For Europe: E27 cord: https://amzn.to/3OVrZjK For the US: E26/E27 cord: https://amzn.to/3V5VYJB Happy printing! **DIMENSIONS |** W 143mm x 90 mm x H 250 mm **PRINTING |** Shade 3~4h **Bulbe socket |** E27 & E26 ## 3D Printing Settings This shade prints **upside-down**. (the STL file is already oriented properly) No need for supports, infill or brim. For cleaner sides than on the pictures I took (if you want an invisible seam) make sure to set the z seam alignment on a sharp edge. I made the mistake of accidentally setting it in the middle of the plain sides, so the seam is visible when the light is on. For BambuLab users, turn on "Arachne" mode in the "Wall Generator" settings. Otherwise Bambu Studio will detect some of the weave layers as empty. **Layer height:** 0.2 or 0.3mm/layer (shade in pictures was printed in 0.3mm/layer) **Wall line count:** 2 **top layers:** 5 **Bottom layers:** 3 **Build adhesion type:** None. If you have adhesion issues, you can add a 5~6mm brim. **Supports:** None **Infill:** None --- [creation tela-table-lamp-e14-e27-e26-fast-print] --- [creation origami-table-lamp-e14] --- [creation o-ridge-floor-lamp-e27-fast-print] --- [creation delta-ridge-table-lamp-fast-print] --- [creation draped-elegance-table-lamp] --- [creation boom-speaker-box-for-smartphones] ---

Files (1)