Sd.Kfz.232 Rad 6 1/10 Scale RC Vehicle

Model Overview & Print Notes

High detail version of the Sd.Kfz.232 Rad 6 in 1/10 scale and Radio Controlled! This is a very high detail model with a lot of design features resembling the real vehicle, such as the chassis design the leaf spring suspension, drivetrain, etc... Would be a great addition for your WW2 vehicle collection! The design features 4x6 drive with fully functional suspension in both axles. *The axles can accommodate a 30mm in diameter differential (1/10 scale| for RC vehicles) . *Dummy differentials are also included. The turret has rotational and elevation movement! Lights! The frontal and rear facing lights have space to fit the LED from the CyberBrick kit. Highly recommend BambuLab 3Dprinters for this project! Parts Required: Electronics: 1x Cyber Brick Controller 1x Standard size servo 180degrees 1x Standard size servo 360degrees 1x Mini Servo 360 degrees 1x JGB37-550 1x Speed Controller 1x 7,4V Li-Po battery 1x 12V Li-Po battery *Optional 2x 30mm in diameter (1/10 scale RC car ) differentials Hardware; Screws for Metal: 16qty M3 x 5mm 6qty M3 x 10mm 2qty M3 x20mm 4qty M3 x30mm Screws for plastic: M2, M2,3 various sizes, *recommend to buy a full kit of screws to use accordingly. Bearings: 12qty 8*12*3,5mm 2qty 15*21*4mm Timing Belt 60XL 6mm width ## 3D Printing Settings 3D printing settings Most parts of the hull are 3Dprinted in PLA standard infill 15% Tires are to be printed by TPU 10% infill Suspension elements is recommended to be 3dprinted by PETG.

Files (2)