Safe Solar Viewer

Model Overview & Print Notes

This is a 3D printed version of the Safe Solar Viewer described by [T.R.Richardson of the College of Charleston Department of Physics and Astronomy](http://richardsont.people.cofc.edu/safe_solar_folder/index.html). It is a safe way to present an image of the sun without risk to anyone's eyes, and is an excellent way to show the sun's image to children. **Never look directly at the sun with binoculars or a telescope as the result will be instant blindness**. It has been designed with the objective lens I had in my drawer - a 400mm focal length lens with a 49mm thread that was intended to be used for macro photography when screwed to the front of a camera lens. The Barlow lens came from [SurplusShed](https://www.surplusshed.com/) as described in the web page: mine was a 28mm diameter lens with a focal length of -20 (ref: L1829). USA buyers will find that buying this lens is easy, but as a UK resident negotiating the post & packing maze was eventful! However, this was the only supplier I could find for this item, and they went out of their way to help me pay the right amount. Important note: anyone trying to make this viewer may have different lenses, so it will be necessary to edit the OpenSCAD code - I have tried to make the code as clear as possible. There is also a file called "testPieces.scad" that only prints the size-critical parts - these use very little filament and allows the builder to get dimensions correct before printing the final pieces. Finally, I show the viewer mounted on my [astrophotography tracker mount](https://cults3d.com/en/3d-model/various/geared-tracker-for-astrophotography) - in reality this wasn't a great idea as this viewer is very sensitive to movement and it is very easy to get it shaking. The original designer's idea, propping it up on blocks, is far more stable. UPDATE: I have added a picture taken during the partial solar eclipse 29 March 2025. Apart from the printed items, you will need some 2020 extrusion - I needed 800mm with my lenses - I recommend that you get 1000mm if you're buying new extrusion, just in case. I had a few odd pieces so joined a couple together for this project. OpenSCAD and STL files are included for the simple joiner and the end caps (you might need to adjust sizes to make these fit properly). You will also need some M5 socket cap screws, washers and T-nuts (I'm not sure what the non-metric equivalents would be). If you decide to add the tripod mount you will also need a 1/4-20 UNC nut (the standard thread for cameras) and a length of aluminium strip 20mm wide - the metal strip holds the nut in place and takes the load instead of the plastic. The strip is drilled to match the tripod mount (use the mount as a template). ## 3D Printing Settings Printer: Anycubic Kossel Linear Plus Filament: PLA Layer height: 0.3mm Temperatures: bed = 60C, nozzle = 200C. Supports: all the major components, otherwise as necessary.

Files (17)