Model Overview & Print Notes

Rocky The Small Rocket Ship Calibration Test Settings Not a Benchy or Cube Update - I have added a Layer Change Multi Colour Model to test the Creality K2 I will always tip my to to the creator of the Benchy Boat but I wanted a model to help calibrate and test my settings on my Klipper enabled printers so I designed this. It will test for stringing, overhangs, bed adhesion and input shaping. Please don't forget to checkout Rocky's bigger and more detailed brother, Big Rocky at https://cults3d.com/:1241550 as seen on As seen on The Real Sam Prentice https://youtube.com/shorts/jtW0DuqIzdY?feature=share and https://youtu.be/R1u-n5Ow-h0 My other designs can be found here https://cults3d.com/en/users/3DPFactory/3d-models The gold one was printed at standard speeds and the green at 200% speed. Please give a like, post a make and don't forget to check out my other designs. I use the following print settings 0.4 Nozzle 0.2 Layer height 10 - 20% Infill No Supports and no brims (optional on brims) Please don't forget to leave a like, thank you. #BENCHY #EASYPRINT #NOSUPPORTS ## 3D Printing Settings This is just a starting point for your test journey. 0.4 Nozzle 0.2 Layer height 10 - 20% Infill No Supports and no brims (optional on brims)