Ribbed Self-Draining Double Pot - 3 Sizes, Short and Long Legs

Model Overview & Print Notes

Double-walled, ribbed, rounded planter with a drainage system. The inner pot has holes that allow water to drain into the outer pot, preventing the roots from sitting in water. Complete set in 3 sizes: Small, Medium, and Large. Each size includes: - Outer Pot - Inner Pot - Short Legs (x4) - Long Legs (x4) The short and long legs fit into the same slot, so you can choose whichever style you prefer. Each piece comes on its own tray, ready to print or rearrange however you like. Perfect for mixing and matching colors: the outer pot in one color and the inner pot and legs in another. Approximate dimensions (diameter x height): Outer planter (without legs): - Small: 100 x 74 mm - Medium: 118 x 89 mm - Large: 137 x 104 mm Inner planter: - Small: 77 x 65 mm - Medium: 92 x 78 mm - Large: 108 x 91 mm Commercial license: You may print and sell the planters. Keywords: plant pot, double planter, pot with drainage, self-draining, ribbed, succulents, decoration, ribbed planter, self-draining pot, plant pot. ## 3D Printing Settings - Printer: FDM (tested on Creality Hi, 0.4 mm nozzle) - Material: PLA / PLA+ - Layer height: 0.3 mm (first layer 0.2 mm) - Infill: 5%, grid pattern - Walls: 2 - Top/bottom layers: 4 / 2 - Temperature: 220 °C nozzle, 65 °C bed - Supports: not needed. Optionally, supports can be added to the leg recesses for a neater look, in case positioning them proves difficult. - Brim: automatic - Each part comes on its own tray. It is recommended to print the outer pot in one color and the inner pot and legs in another. Assembly: Choose short or long legs, glue the 4 legs into the recesses at the base of the outer planter (using instant glue or similar), and place the inner planter inside. For decorative use with plants. PLA is not ideal for outdoor use in prolonged direct sunlight; for that, PETG or ASA is recommended.

Files (1)