Renault Megane 1 Wheel Center Cap – MK1 Hub Cover | 3D Printable STL Replacement Part

Model Overview & Print Notes

This is a 3D scan-based wheel center cap designed specifically for Renault Megane 1 (MK1). The model is created from real part measurements to ensure accurate fitment and OEM-like compatibility. It is designed as a direct replacement for damaged, missing, or worn wheel hub caps. The geometry closely matches the original factory design for proper seating and secure installation. The model is optimized for 3D printing and works best with ABS or ASA filament for outdoor durability and heat resistance. PLA is suitable only for test prints. Installation is simple: print the model, remove supports if needed, and press-fit it into the wheel hub. Minor sanding or scaling adjustments may be required depending on printer calibration. Features: Based on real 3D scan data Renault Megane 1 compatible design OEM-style fit and finish 3D print optimized geometry Easy snap-fit installation Durable replacement solution Note: Printing accuracy depends on printer calibration and material choice. Always test fit before final use. ## 3D Printing Settings Material: ABS (recommended) ASA (best for UV & outdoor durability) PLA (test prints only) Layer Height: 0.20 mm standard 0.16 mm for higher detail Infill: 30–50% (Gyroid / Grid) Walls: 3–4 perimeters 1.2–1.6 mm minimum wall thickness Top/Bottom: 5–6 layers Orientation: Flat face up for best finish Avoid side printing for circular accuracy Supports: Not usually required Light tree supports if needed Temperatures: ABS: 230–250°C nozzle / 100–110°C bed ASA: 240–260°C nozzle / 90–105°C bed PLA: 200–215°C nozzle / 50–60°C bed Cooling: ABS/ASA: fan off or max 20% PLA: 50–100% Enclosure: Recommended for ABS/ASA Adhesion: Brim 5–8 mm (ABS/ASA) PEI or glue stick recommended

Files (1)