Model Overview & Print Notes

Custom-designed rear third brake light frame for Renault Megane 1. This model is dimensioned to fit the original part, giving your vehicle a clean and finished rear appearance. It can be used as a direct replacement for broken, missing, or worn-out stop light frames. The model is optimized for 3D printing, ensuring smooth surface quality and reliable print results. For durability, ABS or ASA filament is recommended. ASA is especially preferred for parts exposed to sunlight and high temperatures due to its superior UV resistance. Designed to require minimal supports. Post-processing such as light sanding and optional painting will further improve the final look. Features: Compatible with Renault Megane 1 Easy to print design Durable and long-lasting Close to OEM appearanc ## 3D Printing Settings Printing Settings & Production Guide: Recommended Materials: ABS or ASA (PLA can be used for testing but not recommended for long-term use) Layer Height: 0.2 mm (0.16 mm for higher detail) Nozzle: 0.4 mm Infill: 30–50% (Grid or Gyroid recommended) Walls/Perimeters: 3–4 Top/Bottom Layers: 4–6 Print Speed: 40–60 mm/s Bed Temperature: ABS: 90–110°C ASA: 90–110°C Nozzle Temperature: ABS: 240–260°C ASA: 240–260°C Cooling Fan: Off or very low (for ABS/ASA)