REAPER repeating Bow or Crossbow

Model Overview & Print Notes

Do not purchase this crossbow check out my other ones they are much better The REAPER is a repeating crossbow and comes in three different models: 7.5 Bow/Crossbow that holds 8 bolts (soon to be updated 6.3 Bow/Crossbow that holds 10 bolts 6.3 Bow/Crossbow with double row magazine that holds 19Bolt, I did over 1000 shots and not once did it jam also, it’s the same height as the 10bolt magazine just a bit wider The reaper is a very strong and sturdy crossbow. it is fun for target practice in the backyard, you can shot all 19 bolts in 10secs. it can be use for small game hunting and sport but its all on your rules and regulations in your country so do your research before doing so please https://youtube.com/shorts/MYLWrkIMHoc?feature=share https://youtube.com/shorts/dnIVNK7xbHQ?feature=share https://youtube.com/shorts/Qqzhcx_xQX0?feature=share https://youtube.com/shorts/JJNelApNGXM?feature=share REAPERS size: Handle and Body 330mm Handle, Body and muzzle 380mm Handle, Body, Muzzle and Stock 590mm minimum Make sure the size is legal in your country Comes with two styles as seen it photos 2 styles of foregrip one for crossbow and other for bow also big and small 1 style of pumpgrip for crossbow only 2 styles of body, as seen in photos 2 styles of magazine, one for muzzle/barrel and the other without 2 styles of muzzle, one with rails and other without Important: this is for RESPONSIBLE ADULTS ONLY!!! I assume no liability for any damage or injury of any kind, use at your own RISK and be responsible with it!!! Before downloading, make sure it is legal in your country and age!! Recommended Material: PLA+, ASA, PETG or ABS Supplies needed: Limb and string 6.3 or 6.5" bolts/arrows, as seen in photos M3 12mm x2 M3 20mm x9 M3 .70 nuts x11, no locking nuts M4 8mm x8 M4 12mm x4 M4 30mm x7 M4 40mm x6 M4 .70 nuts x25, no locking nut 1x8x20mm Springs x2 .6x9.5x10mm Spring x1 grease or vaseline for body rails 5/32x.023x 9/16 spring x1 can be a little bigger or smaller AMAZON links will be added for everything in the manual ## 3D Printing Settings Minimum bed size 250x250mm Cocking arm and Trigger print at 90% infill all other parts 40% infill or greater Wall Thickness 2.25 Wall count 6 Top/Bottom Thickness 1.2 Top/Botton layers 6 All parts are printed without supports besides foregrips, pumpgrip and muzzle

Files (1)