Raspberry Pi Official Touchscreen Case

Model Overview & Print Notes

[](https://github.com/mkellsy/rpi-case-model) This is a case for the official Raspberry Pi 7" touchscreen. [https://www.raspberrypi.org/products/raspberry-pi-touch-display/](https://www.raspberrypi.org/products/raspberry-pi-touch-display/) There is enough room to connect the display ribbon and the power all inside the case. This matches my Raspberry Pi case found here. [https://cults3d.com/en/3d-model/tool/raspberry-pi-3-b-case](https://cults3d.com/en/3d-model/tool/raspberry-pi-3-b-case). ## Configurations Multiple back cover configurations. ### - Standard - Slotted for a camera ribbon - 25 mm and 30 mm fan cutouts - Clean version (great for modding and remixing) ## Assembly To assemble you will need ### - A #6-32 tap. - 4 x #4-40 x 3/8 stainless socket head cap screws. - 8 x #6-32 x 1/2 stainless socket head cap screws. - 4 x #6-32 x 1 stainless socket head cap screws. More detailed instructions can be found here. [Assembly Instructions](https://github.com/mkellsy/rpi-case-model/blob/master/RTS-ASSEMBLY.md). ## Updates ### 1/21/2019 Update. - Added slotted, 25 mm fan and 30 mm fan covers without the honeycomb. ### 1/20/2019 Update. - I changed the bolt pattern to accommodate #6-32 screws. - Added support backing for the frame screws. - Added material behind the frame mounts. - Added 4 frame mount points to better compress the screen. - Changed leg geometry to clear the new frame mounts. ### 1/19/2019 Update. - Changed the honeycomb pattern, it is much cleaner. - Lengthened the legs to accommodate larger USB power cables. ### 1/18/2019 Update. - Added a slotted back cover for a camera ribbon. - Added a 25 mm and a 30 mm fan back cover. - Added a blank back cover. ### 1/17/2019 Update. - Rotated STL files to lay on print bed. - Combined the left and right legs into one STL file. - Increased the thickness of the legs. ## 3D Printing Settings

Files (11)