prototype articulated

Model Overview & Print Notes

🕷️ The Prototype has awakened... From the forgotten depths of the factory emerges a creation that appears to be constructed from the remains of machines, secrets, and forbidden experiments. This articulated Prototype is not just a figure... it is a piece that seems to have been taken directly from an abandoned laboratory. ## 3D Printing Settings 🏗️ Model Information: For this print, I used two printers: the Creality K1C and the Anycubic Kobra 2 Pro. The model is divided into 11 pieces to facilitate printing and painting. The total size of the assembled and extended figure is X362.07 Y208.36 Y129.36 🛠️ Print Settings: Slicer used: Anycubic Slicer and creality print 7 Layer height: 0.2mm Infill: 15% Supports:yes Only for the legs and arms, do not use supports. Printing time: 12 hours 16 min Printer used: Anycubic Kobra 2 Pro and creality k1c Filament used: Kexcelled - pla white Filament consumption: 211.67g 🖌️ The model was printed with Kexcelled -white PLA Filament and hand-painted using acrylic paints and a brush. (This model does not include 3mf; it is only for printing in a single color.)

Files (11)