Model Overview & Print Notes

Fusing old and new technology for storing memories. Turning digital into analog with 3d printing. See it in action [here](https://www.youtube.com/watch?v=e8vOinbLOLM&ab_channel=Dehapro) Bracket includes : 4,5,6,8,9,10,12 sides (can be mix and match) Lithophane instructions : - Head over to https://3dp.rocks/lithophane/ - Tips for image : add vignette if borders are bright - Upload image of 4:3 or 3:4 (must be this ratio) - Key in Model Settings: - Max size = 61mm - Thickness = 1.5mm - Border = 0 - Thinnest layer = 0.5mm - Vectors per pixel = 4 - Base = 0 - Curve = 0 - Key in Image Settings : - Positive image - Mirror image off - Flip image off - Repeat X count = 0 - Repeat Y count = 0 - Mirror repeat off - Flip repeat off - Print image ## 3D Printing Settings Frame : - Layer height : 0.3mm Image : - Layer height : 0.2mm - Raft : Yes - Print orientation : On long side (less time) - Infill : 100%