Laptop stand

Model Overview & Print Notes

The base for a laptop stand—I made this for my teacher at her request (I did it almost for free, since I only had the blueprint). I snapped this photo in a hurry, but I think you can see what it looks like when assembled. I recommend adding your own engraving like in the photo, but it’ll eat through the plywood pretty quickly. (I’d be happy to get a few kopecks for this job.) ## 3D Printing Settings For laser cutting, the material must be 3 mm thick; otherwise, you’ll need to adjust all the connections. Plywood or plexiglass (plastic) is recommended. (I used a speed of 10 mm/s and 40% power, but settings may vary, so use your own.)

Files (1)