Model Overview & Print Notes

This tray has a wood grain appearance and is has Oyster mushrooms sprouting from all sides. It comes with 3 brackets, one for an ikea skadis pegboard, one is for a standard pegboard and the other screws into the wall. This is meant for light use, not for heavy objects. For more accessories that go with my BrickBrack mounting system including a mini pegboard, check out my BrickBrack starter pack listing. https://cults3d.com/en/3d-model/home/pegboard-wall-skadis-organization-decor-system-brickbrack-starter-packag Installation is super easy, just mount the chosen bracket and slide the shelf on. If you are mounting the wall bracket I would strongly recommend either screwing into a stud or using wall anchors. [Members](https://tinyurl.com/2nxf3jsd) get access to my premium files and authorization to use the prints commercially. ## 3D Printing Settings I would recommend tree supports at 70% touching buildplate. >25% infill for the shelf. For the brackets I would lay them flat side down and print without support with >50% infill.