Model Overview & Print Notes

No Supports required for this print! Wine bottle holder in shape of a dragon - No supports required, single piece print, two versions - with wings and without wings (for smaller printers) Enjoy hassle-less printing without any supports required to print these models. Both tested with up to 0.75 Liter glass bottles of wine. #DRAGONXCULTS ## 3D Printing Settings SETTINGS FOR MODDEL WITH WINGS: NO SUPPORTS REQUIRED Print Dimensions: Height = 7.51 inches (19.1 cm) | Base size = 8.82 inches * 6.06 inches (22.4 cm * 15.4 cm) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 6 hours and 58 Minutes Amount of material required: ~54.5m SETTINGS FOR MODEL WITHOUT WINGS: NO SUPPORTS REQUIRED Print Dimensions: Height = 7.51 inches (19.1 cm) | Base size = 7.60 inches * 5.67 inches (19.3 cm * 14.4 cm) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 6 hours and 21 Minutes Amount of material required: ~49.5m #DRAGONXCULTS