Model Overview & Print Notes

This thread adapter converts the original 12mm MP7 muzzle thread into the standard 14mm CCW (counter-clockwise) airsoft thread, allowing you to install standard suppressors, tracer units, and other 14mm CCW muzzle devices. The download now includes two STL files to cover the different MP7 thread configurations: - 12mm CW → 14mm CCW — for VFC MP7 - 12mm CCW → 14mm CCW — for Tokyo Marui and WE MP7 --- Key Features Converts the original 12mm MP7 thread → standard 14mm CCW VFC version: 12mm CW → 14mm CCW Tokyo Marui / WE version: 12mm CCW → 14mm CCW Compatible with standard 14mm CCW suppressors, tracer units and muzzle devices Hexagonal exterior for easy tightening and removal without tools Compact and clean design 2 STL files included for the different thread configurations --- **Printing Recommendations** - Material: Minimum PETG (recommended for durability) - Perimeters: At least 5 walls - Infill: 25–40% - Layer height: 0.12–0.20 mm for better thread precision --- **Notes** - Print with good cooling for clean and precise threads. - Light sanding may be required depending on your printer and material tolerances. - Check the thread orientation before installation. - Do not overtighten the adapter or attached accessories. - Make sure you select the correct STL for your MP7. --- **Important** VFC MP7 → 12mm CW Tokyo Marui / WE MP7 → 12mm CCW The two versions are not interchangeable due to the different thread directions. --- **Disclaimer** Fan-made airsoft accessory. Not an official Tokyo Marui, VFC, or WE product. ## 3D Printing Settings