Model Overview & Print Notes

Design story and technique This is a parametric sculptural relief: a minimalist female head composed as a continuous wave-like surface. The surface is divided at panel boundaries so the assembled work reads as one composition rather than a set of separate elements. AI was not used to generate the 3D geometry; text was created with assistance. Technical characteristics - Finished panel: 200 × 200 mm - Maximum depth: 45 mm - Parts supplied: 1 printable panel tile (1 × 1 assembly) - Sized for a 350 × 350 mm print bed - Recommended material: PLA - Infill reference: 15% (provided in included print settings) - Perimeters reference: 2 (provided in included print settings) Customize this design This download is one ready-to-print configuration of a parametric design. Open the original design in Bibizoza to make your own version of Minimalist Female Head: https://bibizoza.com/wave/minimalist-female-head-wave-wall-art-982ace74?utm_source=cults3d&utm_medium=marketplace&utm_campaign=free_models&utm_content=minimalist-female-head-wave-wall-art-982ace74 You can change the finished dimensions, fit it to your print area, change the pattern of each layer, change the outline it is cut to and adjust the relief depth and rib geometry, then generate a printable version. The files in this download are complete and ready to print as they are — Bibizoza is for making a different version, not for unlocking this one. Assembly overview This kit is delivered as a single panel tile. The continuous surface is divided only at panel boundaries so the single-part assembly presents as a unified relief once mounted. No jig is included. Files and package contents See Included files for the exact list and formats. Preview images and a 3MF plate layout are provided to help visualise and place the tile on a 350 × 350 mm bed. License Distributed under the Bibizoza Personal Use License (see included LICENSE.txt). The download also includes the supporting files supplied with the generated Bibizoza kit. 3D printing settings Recommended setup The original generated kit uses: 15% infill 2 perimeters approximately 196 g of filament approximately 11–13 hours printing time The model was generated for a 350 × 350 mm print area. Scaling If you scale the STL directly in your slicer, remember that scaling changes not only the width and height but also the thickness of the model. If you need a significantly different finished size, it is better to generate/remix the model at the required dimensions in Bibizoza rather than simply scaling the STL. Material PLA is a natural choice for indoor decorative wall art. Always check the sliced model before printing, especially after changing its scale or slicer profile. Create your own version Create and customize more printable wall-art designs with Bibizoza: https://bibizoza.com?utm_source=cults3d&utm_medium=marketplace&utm_campaign=free_models&utm_content=minimalist-female-head-wave-wall-art-982ace74_home ## 3D Printing Settings Finished size: 200 × 200 mm Maximum depth: 45 mm Parts: 1 Print plates: 1 Fits a 350 × 350 mm print area Material: PLA Filament: approximately 196 g