Model Overview & Print Notes

*** New face plate for 190mm version added which works with the base.stl. original 190mm Panel.stl & 290mm Panel.stl will NOT work with base.*** Marvel logo with inset lithophane as the letters. The print comes in two parts. The first 'panel' print which incorporates the lithophane is best printed vertically at a small layer height to achieve the highest image quality. The second 'marvel logo' can be printed flat without issues. The two prints can then be simply glued together to get a unique marvel logo lithophane. I've included two sizes 190mm & 290mm long panels as scaling a lithophane stl is not recommended. The pictures show the 190mm panel (alas my print bed is not large enough for the 290mm panel) 3D PRINTING SETTINGS Lithophane Panel: Print vertically (ideally aligned along the y-axis) 0.1 layer height, 100% infill, 6 bottom, top and perimeters. Marvel Logo: Print flat on bed, 0.2 layer height, 5 bottom / top layers, infill 20 % (although doesn't matter as no infill layers) CHECK OUT https://cults3d.com/en/3d-model/art/marvel-logo-lithophane-the-complete-set if your interested in all the designs. Marvel - The Originals https://cults3d.com/en/3d-model/art/marvel-logo-lithophane-the-original-avengers-junkie_ball Marvel - Thes Ladies https://cults3d.com/en/3d-model/art/marvel-logo-lithophane-the-ladies ## 3D Printing Settings Panel Lithophane : Imprimer verticalement (idéalement aligné sur l'axe des y) 0,1 couche de hauteur, 100% de remplissage, 6 en bas, en haut et sur les périmètres. Logo Marvel : Impression à plat sur le lit, hauteur de 0,2 couche, 5 couches inférieures/supérieures, remplissage 20 % (sans importance car aucune couche de remplissage)