Mantis Mini Sportyacht Jet Boat "220 print bed"

Model Overview & Print Notes

**Welcome to the "Mantis Mini" Sportyacht** Thank you for your interest the Mantis Mini. This is an 85% smaller scaled version of the Mantis Jet Boat, so it fits on a 220 print bed. And only one jet fits in this version instead of two like in the larger version The original version is designed for 256 x 256 and can be found here: https://cults3d.com/de/modell-3d/spiel/sportyacht-two-jets-boat-mantis if you want to build a larger boat... The result of scaling down is that I made a few changes from the original version, which are all described in detail in the **instructions Here:** https://drive.google.com/file/d/16xTXM0m22GhOCt2kRq8f5XCXiW2AMXXE/view?usp=sharing --- **This boat is designed for one jet from MJET Development, either the MJet 35 drive.** **Video:** https://youtu.be/eXDqKwBGiLE?si=D03uetFWfuTSFqHu **You can download and print them here:** MJet 35: https://www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-35-3d-printable-jet-pump-for-rc-boats --- **Community Support** Join our community to share your build and get support: Facebook Group: https://www.facebook.com/groups/1495734037969634/ Discord Server: https://discord.gg/j2zdESp5 **Note for Experienced Builders** While the instructions are detailed, some steps may be challenging for inexperienced builders. Feel free to seek help in the Facebook group. **Selling Built Boats** Mass production for sale is not allowed without a contract. Selling 1-2 boats per year to make room for new projects is acceptable. **Technical Specifications** Total Length: 800mm Total Width: 216mm Total Height: 206mm Printed Weight: ~2300g ± **Print Settings** Structural Parts: Minimum 2 walls Minimum 4 top/bottom layers Minimum 20% infill Details: Minimum 2 walls Minimum 4 top/bottom layers Minimum 10% infill **Hardware Needed** 2.6kg PLA+ filament and 0.1kg PETG/PCCF/ASA Assortment of M2 screws Assortment of M3 screws M3x5.7-OD4.6 Heat inserts 2k epoxy glue CA glue Note: All screw lengths in the pictures are the maximum lengths. ## 3D Printing Settings

Files (2)