MANDO | paper towel roll holder

Model Overview & Print Notes

**MANDO | paper towel roll holder** Store your kitchen paper towel roll in style with this elegant wicker roll holder. Any 3D printer can print it without exceptional print settings and a regular 0.4mm nozzle. (See settings below) Happy printing! **DIMENSIONS (Large) |** Ø 142 mm x H 250 mm **DIMENSIONS (Small) |** Ø 142 mm x H 209 mm **V5 UPDATE:** This new version has a thicker weave of 0.9mm instead of 0.5mm. After using my own MANDO for quite a while, I found the 0.5mm weave too fragile. 0.9mm weave is made of 2 wall lines, it is much stronger and gives a very clean print. Also, I made the frame a little bigger/stronger, which should give a cleaner print. ## 3D Printing Settings The roll holder prints upright without supports or brim. The STL file is already oriented properly. For BambuLab users, turn on "Arachne" mode in the "Wall Generator" settings. Otherwise Bambu Studio will detect some of the weave layers as empty. **Layer height:** 0.3mm/layer **Wall line count:** 2 **Build adhesion type:** None **Supports:** None **Infill:** 20~30% --- [creation tela-table-lamp-e14-e27-e26-fast-print] --- [creation kete-pendant-light-e27-e26-fast-print] --- [creation o-ridge-floor-lamp-e27-fast-print] --- [creation delta-ridge-table-lamp-fast-print] --- [creation draped-elegance-table-lamp] --- [creation boom-speaker-box-for-smartphones] ---

Files (2)