Model Overview & Print Notes

DARTH VADER PLANTER POT VASE 2066 This is a remix of a (remix of a) "Low-poly Space Toys" by Flowalistik Model size: - 120x135x85 mm (scalable) - 1.6 mm wall thickness Scale the model to your needs. ## 3D Printing Settings Scale the planter model in the slicer software. Thank you for choosing this 3D printable planter model! This download includes two versions of the planter model: - Normal 3D model (with fixed wall thickness) - Solid (Block) Model (for hollow printing with adjustable walls) You can print your planter using three common methods, each with different benefits: 1. Normal printing mode (for a normal model with a wall thickness fixed by design) 2. Vase mode printing (for both normal and solid-block model) 3. Hollow Print (no top + no infill, for solid-block model) NORMAL PRINTING method * Solid, durable vase * Fixed wall thickness by design * Recommended settings: -- Layer height: 0.16–0.24 mm -- Top layers: 3–4 -- Bottom layers: 6–8 -- Wall line count: 4–6 -- Infill: 15% (often not needed) -- Spiral/vase mode: OFF -- Print speed: 40–60 mm/s VASE-MODE PRINTING method (Spiralize Outer Contour). Prints a single continuous outer wall (thin, hollow vase). * Lightweight and fast * Best for decorative use * Enable vase mode, aka “Spiralize Outer Contour” in a Cura slicer * No top layers, no infill * Best with big nozzles 0.8-1.2 mm SOLID-MODEL VASE PRINTING * For the included SOLID (solid block) 3d model * Hollow with adjustable wall thickness * Stronger than standard vase mode * Recommended settings: -- Layer height: 0.16–0.24 mm -- Top layers: 0 -- Wall line count: 3–6 -- Bottom layers: 6–12 -- Infill: 0% -- Spiral/vase mode: OFF -- Print speed: 40–60 mm/s Choose the method that fits your needs for strength, print time, and material usage! Visit us on IG @namu3d and @n3d.design ;)