Large Death Star Lamp

Model Overview & Print Notes

Update Oct 26,2022. Two additional STL files added for different Lightbulb mounts. V3.2.2 is for a standard lightbulb cord purchasable from Amazon (Found here: https://www.amazon.ca/gp/product/B07J657TJF/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1). V4 is for the IKEA Stralla lightbulb cord that is compatible with E12 chandelier bulbs (https://www.ikea.com/ca/en/p/strala-cord-set-white-90371505/). This is a large version of the Death Star lamp. It measures 210mm in diameter and just fits on an Ender 3 print bed. It comes with a mount system that is compatible with Ikea Hemma lightbulb cord. There are two versions - one for bottom mounting and placing on a table using the provided base, or a top mount for hanging from the ceiling. Use a 60-100 W LED bulb to make your battle station fully operational! This model is a remix of Tato_713's design https://cults3d.com/en/3d-model/art/death-star-scaled-one-in-two-million. ## 3D Printing Settings Print the Death Star at 100% infill for the lithophane effect. This print takes approx 3 days 7 hours at .16mm height, or 2 days 10 hours with a 0.6mm nozzle at 0.2mm layer height. For the lightbulb mount print with lots of perimeters (5 or 6) so that the cone is comprised of only perimeters (no infill). If you print with only 2 or 3 perimeters with infill it is possible for a surface depression to form that gives a poor surface finish. Print the wire frame cube at 15% infill with 2-3 perimeters. Glue together with super glue.

Files (6)