update 07.01.2018: uploaded sketch for back and helmet. Here are my files for a complete Iron Man MK6 suit. It looks great, but it is NOT comfortable. And because it is halloweentime I added a battledamaged mask for the helmet. Here is a video of the moving faceplate. Special thanks to "redeathray" for checking my code and helping me. https://youtu.be/Wdb1UWU4UAY https://youtu.be/P-KLNkn2KAA https://youtu.be/ZY1E9p6GItU The pictures show me trying out all parts.The electronics are not yet completed, but I think you are more interrested in the files. One picture shows a small version of the MK6 helmet as battledamaged. I gonne use it as decoration for Halloween. I prefere the MK3 helmet to wear. I like the look more. You can download it from "jhon De Sousa" on the following link: http://www.thingiverse.com/thing:260152 Most parts are founded on the following 24cm high Iron Man MK6 shell figure from "RohitVen". I asked him to rework and publish his files as a costume and he agreed to. http://www.thingiverse.com/thing:1026995 The gloves are made of a Papakura file. The glove is originaly made by "zabana" and remixed by "darkside501st". Below the original link for the glove: http://www.therpf.com/showthread.php?t=139470&highlight=hand+zabana As arc reactor I used this Modell from "Thaurus": http://www.thingiverse.com/thing:1377484 All parts were made for a Prusa I3 with a 220x220x240mm buildplate. If you have any problems or find parts which are to big please contact me and I will do my best to change it. Except of the printed parts, some buckles (printed or bought), elastic strap and a lot of soft foam for a little comfort you will need the following parts: Helm: 4x M4 Bush, MG995 Servo, any arduinoor other micro controller, at least 8x LED white, 4x M4x10, 4x M3x20, 4x M3 nut, acrylglass, 2x contactor , (or 1x, depending on the sketch you use) Neck: EVA foam for a comfortable and flexible neck (if you want to make a neck) Chest: acrylglass 2x M4x40, 2x M4 nut, ABS: EVA foam for a comfortable and flexible sideparts Lower arm (each): some springs for a backflipping handplate, M4x20, M4 nut Gloves (each): 4x LED White, 1x G4 COB LED spot, 1x contactor (to enable G4 COB as repulsor) Hips: M4x25, M4 nut Thigh: if you want the knee moving / flapping you will need four springs. I used a blow-dryer to make it a Little more comfortable, because they are really to narrow for my legs. But I could not resize them, because then they wont fit to the rest of the costume and it won't look good . Shoe: a lot of foam to make it suitable. Clipmount: it is made to attach the elastc strap. you will need a M4x25 and a M4 nut for each, you can connect the different parts by using a clips It might be that some parts to not fit to your body. please check it bevor you print all. I am about 1.8 meters high and I have a weight of 80kg. The following measures may help you: head: 58cm shoulders 53cm (from side to side) chest: 105cm waist: 90cm hips: 104cm If you got any questions feel free to ask and massage me. I hope you enjoy it. ## 3D Printing Settings