Iron Man Arc Reactor

Model Overview & Print Notes

Iron Man arc reactor made in Fusion 360 and 3d printed with the Cr-10 and the Anet A8. Note: Part 10 needs to be printed 10 times. Part 9 has been updated with hex grid. LED: Are 5mm ultra bright LEDs. In order to not use a resistor, the LED's needs to have a forward voltage of 3.6V and be from de same package, otherwise you will have to add a resistor. Copper Wire Gauge 18 Screws used: 3 M2x4 and 3 M3x8 Commercial license available at: https://www.patreon.com/336252/join ## 3D Printing Settings

Files (12)