Hang-on Wall Soil Planter

Model Overview & Print Notes

As the name suggests, this planter box is designed to contain potting soil, which from my many tests over a period of 2 years, provides me with a good balance of nutrients retention and ensures that the planting medium isn't flooded. This planter box is designed to have fitted a diameter 8mm humidifier cotton stick glues to the biggest hole at the centre of the pot. The length of the stick is determined by the height of the water level in your aquarium. The sticks can be purchased from Daiso outlets And yes, you could use other forms of cotton yarn of your choosing, but based on my tests, these sticks are much more efficient at ensuring the soil is moist; where the beauty of this design allows excess moisture to just drip down. Also, in celebration of our 9th year anniversary, this design is now free!!!! *Just a tip, if possible, do not allow the water surface of your tank to touch the base of this planter, this would ensure an optimal growing environment. ## 3D Printing Settings Designed for printer that have a minimum printing volume of 120x120x120mm. Suggested material: PLA+ Layer height: 0.2mm Top, Bottom thickness: 3 layers / 0.6mm Wall thickness: 2 layers / 0.8mm Density/Infill percentage: 12-20% (*dependant on your choice of material); lighter is golden. Suggested infill pattern: cubic (ideal), grid (minimal) Support structure: Yes / Touching Build Plate

Files (1)