flexible LURE

Model Overview & Print Notes

I recommend you also take a look at NEW : PRACTICAL FEEDERS (3 types 9 variants ) https://cults3d.com/:1906687 my boilise press https://cults3d.com/:814867 earth worms catcher https://cults3d.com/:2043355 What you need : 1. Steel Screw Eye 5mm - 12mm- 1.2mm 2. Fishing Split Rings 5,6mm x 4mm x 0,7 (Optimal smallest size but larger can be used ) --------------------------------------------- In total there are 2 sizes 90,75mm and 68,83mm. The holes for the eye bolts are set in the 3d model to 1.20 mm for both versions.The bolts are screwed in well and are very strong even without any glue. We don't want to damage the fish if the plastic bait gets damaged , so we secure and thread the braided line between the front rear eyelet and also don't forget to thread between the bends.The bait remains flexible in this way. The printing time of the larger lure is approximately 55 minutes. In this case it is necessary to observe the settings and do not try to save on material at the expense of losing strength. ---------------------------------------- The weight including the triple hook is approximately 13 grams for large lure and 7.5 grams for the small, but the settings must be observed. --------------------------------------- All my fishing equipment https://cults3d.com/en/design-collections/BIONICFACTORY/fishing-equipment ## 3D Printing Settings 7 walls 100% infill 0,28 layer height material PLA use fast print

Files (2)