Spice rack

Model Overview & Print Notes

Sliding Spice Rack KITCHEN 2 models available 1 requires assembly (4 parts to be glued together with dowels) for Z-format printers that cannot exceed 205 mm and 1 requires no assembly for large-format printers To ensure smooth and quiet sliding, I glued PTFE strips to the sliding part (male), which you can find here, for example: https://www.amazon.fr/On1shelf-temp%C3%A9rature-antistatique-r%C3%A9sistant-%C3%A9lectrique/dp/B0DDCQ188G?th=1 The total external length is 295 mm Useful length: 304 mm Note: There are two types of stop blocks: one for the small model and one for the large model If you choose the small model, be sure to glue the dowels only halfway in Holds approximately 7 standard “DUCROT”-type jars ” The female part is designed to be secured with 6 countersunk wood screws, diameter 4 or 5 (pay attention to the length), to be installed on the right side of a cabinet But you can easily adjust the symmetry so that it’s on the left. I printed this template (see photos) and it works, so be careful with your printer settings Happy cooking… https://cults3d.com/fr/utilisateurs/Jus/fichiers-3d ## 3D Printing Settings PLA 165° 0.15

Files (12)