ELEGANT MINI PLANTER - Minimalist Self Draining design V2*

Model Overview & Print Notes

Among a garden filled with wonderful plants, there has to be a person, or in this case something to help regulate the flow of water. This mini planter will allow you to grow seeds, plants and flowers for decorative purposes throughout the home's office, kitchen or even outside. I ensured to fillet as much edges as possible to help add to the smoothness and sleekness-of-a-touch this beaty is :) All that being said, the files print like a breeze with the file including both, the water retainer and the six pots you'll need to grow a little garden wherever you want. BENIFITS: - Self draining design - Captures the drained water in the extruded reservoir - Everything prints and fits perfectly straight of the bat - The curved interior base of the pots ensures better drainage and structural stability ## 3D Printing Settings PRINT SETTINGS in PLA: (NO SUPPORTS NEEDED) Water Retainer: - Print at 50-100% Rectilinear infill to help prevent water from escaping after the plant is watered - Printed in 0.3mm layer height, realistically takes upwards of around 10 hours depending on your infill pattern + print speed - Avoid peeling off from the print bed until cool to prevent warping (so your plant doesn't wobble :)) - 60 Degrees bed temp with 205 degrees for nozzle Planter Housing: - 0.3mm layer height for quicker time (At 10% infill, this takes a few hours depending on infill pattern) - 60 Degrees bed temp with 205 degrees for nozzle

Files (4)