DRAGON HEAD ACCESSORY HOLDER || MOVABLE JAW VERSION || DESK STAND OR WALL MOUNTED

Model Overview & Print Notes

Introducing the Dragon Bust Controller/Headphone Holder. Made with an added shield backplate to add to the fantasy theme. Comes with the option of being wall mounted or placed on a desk. - This file is the "Moveable Jaw", meaning it's a 2 part print with a top jaw that can lift and close to hold accessories. Print in place version listed here: https://cults3d.com/:1868082 - Made with the idea of holding multiple types of controllers, and tossing on some headphones for the added style. Sizing it down might cause issues with some controllers (namely the Xbox controller). - The "Top Jaw" file can have it's X axis/widened to at most 103% (change the X value from anywhere between 145.17mm to 149.53). This allows for an easier time snapping it in place, however you have the drawback of a looser jaw. - **For those who want to mount this on a wall:** take note of the 2 notches at the top of the shield. These are there to show where the screw holes are in the back. Comes with 3 files: - Dragon Bust base - Dragon Bust top Jaw - The stand (with long or short legs) with 1/2in. bumper holes (personally I use "Vellax Cabinet Door Bumpers" on Amazon). Make sure to follow my page, TikTok, and Instagram (all under "UnchainedHobbies") for upcoming designs and please leave a comment and photo of your new prints! *Consider joining my [Patreon](https://www.patreon.com/unchainedhobbies) for a Commercial License, my collection of models, and Patreon exclusive designs* ## 3D Printing Settings The photos listed show the following setup - Printed with Elegoo Pla/Flashforge Burnt Titanium - No Supports - 2 walls - .2mm layer height OR .24mm for rapid prototyping - 10% infill Cubic OR Lightning infill + 4 walls for rapid prototyping. - Printed with FDM/PLA printing in mind

Files (8)