Cat Vessel

A catnip pot, succulent pot, pencil holder, etc. Update 2018-08-14 added lo-poly version Customize:

• Cat width (mm)
• Wall thickness (mm)
• Drain hole: yes or no
• Drain hole diameter (mm)
• Vessel, saucer or both
• Normal or lo-poly render mode

The .stl files use these settings:

catWidth = 100
wall = 1.8
drainHole = yes
hole = 10
vesselOrSaucer = vessel
renderMode = normal

See my entire collection of customizable planters/vessels ## 3D Printing Settings