Chibi Espeon Flexy - Articulated - Print in Place

Model Overview & Print Notes

**Update 4/15/22 - Added a support free version that has a few different options (look at photos 3-4). Will need to use glue to fuse the pieces together once printed* Original version of the Chibi Espeon does need some supports on the tufts. I've included a photo showing you where the support blockers were placed on the test print. Models were printed at 100% and 75%. Size is 136x128x129mm at 100% Please feel free to share images of your prints, I would love to see them! ^_^ ! For personal use only! You may not redistribute or sell my files in any way! If you are interested in selling 3D Printed items (not files) of my work, visit my Patreon for a commercial license and other perks: https://www.patreon.com/MysticSaige !NOT intended for small children due to potential choking hazard! ## 3D Printing Settings Print in Place - Some supports ARE needed! Cura support settings: Tree supports at 50% overhang and add support blockers to whole body except for the 4 lowest tufts. 3+ perimeters (the more the stronger it will be). 15%+ infill. Make sure to enable bridge settings. Great in PLA. !! Make sure to have good bed adhesion or a brim !!

Files (1)