Model Overview & Print Notes

A wall-mounted medal display shaped like a loaded barbell, with three plates, a collar and a sleeve on each side, a knurled bar, and nine lipped hooks along the bottom for medal ribbons. Two versions are included: EARNED NOT GIVEN and a plain bar. Separate base and relief files let you print the barbell in a second colour (silver on black looks great). It works for powerlifting, weightlifting, CrossFit, running and other sports medals. DIMENSIONS: 200 x 37 x 92 mm (W x D x H, main file). 9 hooks, 11 mm wide, reaching 32 mm from the wall with a 14 mm lip. Each hook holds several ribbons. The part fits a 220 x 220 mm bed (a Bambu A1, Ender 3 or larger). INCLUDED FILES: - barbell_medal_hanger_EARNED_NOT_GIVEN.stl (200 x 37 x 92 mm) - barbell_medal_hanger_blank.stl (200 x 37 x 92 mm) - barbell_medal_hanger_EARNED_NOT_GIVEN_base.stl (200 x 37 x 92 mm) - barbell_medal_hanger_EARNED_NOT_GIVEN_relief.stl (200 x 4 x 92 mm) - Printing notes (TXT) PRINT SETTINGS (recommended): - Orientation: Print standing upright on its long flat bottom edge, exactly as oriented: hooks flat on the bed, lips pointing up. No supports. The smaller plates have 45 degree chamfers underneath. For two colours, load the _base and _relief files together as one multi-part object and assign a filament to each. - Layer height: 0.2 mm - Walls: 4 perimeters (1.6 mm) - Infill: 20% - Supports: No - Brim: 5 mm brim recommended (tall, thin part) - Material: PLA, silk PLA or PETG - Filament: ~80-90 g (estimate) - Print time: ~3-7 h (estimate, depends on printer and speed) - Hardware: 2x 4 mm countersunk wood screws plus wall anchors as needed (holes are 4.5 mm with a front countersink, through the two big plates). All meshes are checked as watertight and manifold, with flat bottoms, sized in mm, and designed for supportless printing on a typical FDM printer (Bambu A1, Ender 3 or similar, 220 x 220 mm bed). The models contain no logos or trademarks. Made with AI assistance: this model was designed as a parametric OpenSCAD file with the help of an AI design assistant, then checked, rendered and prepared for printing by Gentle Art Goods. LICENSE: Cults - Private Use. You may print this model for your own private use or as a gift. You may NOT share, resell or redistribute the digital files (original or modified), and you may NOT sell printed copies. (c) 2026 Gentle Art Goods. All rights reserved. ## 3D Printing Settings