Model Overview & Print Notes

**No supports required. Just slice and print!!** 4 Versions available: - Shark_vX_A.stl: Original design, movable jaw - Shark_vX_B.stl: Friendly face, movable jaw - Shark_vX_C.stl: Original design, NON-movable jaw - Shark_vX_D.stl: Friendly face, NON-movable jaw **Design updated to v4 for a tighter tail joint** The non-movable versions are intended for children, as teeth are quite sharp. Or just in case you have trouble printing the movable one. **Best results if you use a thin layer resolution (0.16 mm works perfect)** After printing, the tail and the jaw should get free with a little force: https://youtu.be/14z1ll9yMmU Then just enjoy it, even in the water!! https://youtu.be/E1W-RyH8bGA https://youtu.be/aV-XhMr7Edc Check here for [Commercial License](https://www.mcgybeer.xyz/commercial-license) ## 3D Printing Settings