Arduino Uno Slide Case

Model Overview & Print Notes

An Arduino Uno enclosure with a sliding lid. The lid snaps into place securely. With the lid on, the I/O, ICSP pins, reset button and ports are accessible and the pinout labels are visible. Several configurations, with and without logos and mounting tabs. Logos press-fit into the mating pieces without glue. Requires (2) M3 x 4.5mm long heat set threaded inserts (McMaster Carr #94459A130) and (2) M3 x 6mm long machine screws (McMaster Carr #92005A116). ## 3D Printing Settings Printed at 0.12mm layer height with PLA. No supports. Print all parts in the same orientation as they are assembled on the finished case (rounded edges up).

Files (8)