Model Overview & Print Notes

Bring your AK platform into the 21st century. Made by reverse design, is a almost 1:1 copy of the SAG BIT mount, the only main change is in the attachment style, instead of threding the clamp, is desing to fit a M5 standar nut. Hardware Required: -1x M5x25 mm Socket Head Cap Screw (DIN 912 recommended for the best tactical look) -1x M5 Hex Nut ## 3D Printing Settings Material: Matte PLA, PETG, or ABS/ASA. (Recommendation: Use filaments in tactical matte colors like Coyote Tan, FDE, or Black to achieve that injected polymer or anodized aluminum finish). Infill: Minimum 60% - 80% with Gyroid pattern to ensure maximum structural rigidity if it's going to take hits and heavy use on the field. Layer Height: 0.12 mm - 0.16 mm. Lowering the layer height ensures the 45-degree bevels of the Picatinny rail are millimeter-perfect and optics fit tightly with no wobble. Supports: Yes. Tree supports are recommended for the lower clamping jaw areas.