OCR Ninja grip training 130mm hold 13cm/5,1" roller - armlifting gripbro - file for 3D printing - 3D STL Model Climbing Cone Hanging Hold

Model Overview & Print Notes

STL model of very challenging grip hold for obstacle ninja training/ climbing. Cone-style cylindric hold 130mm tall / 5,1" If you want to train fingers, grip/ forearm strength, run in obstacle course or ninja warrior. Warm up before rock climbing route or just do unusual effective pull ups. This tool is for you Model is tested for at least 70kg - 150lb static load but probably will sustain over 100kg - 220lb. The auction offers only set of files to 3d print yourself. If you don't have a 3D printer, ask a friend who has one or delegate this job to the local 3D printing facility. The package consists of: - User manual describing Licencing, Usefull printer settings, dos an don'ts. How to assembly. - Individual STL file of 130mm/5,1" Cone style Hold To make this tool complete as shown on pictures you need around (40centimeter or 16inch) of 5-6mm rope. And carabiner, more details in user manual. My models are not typically free, because are based on knowledge and experience from sport and 3D printing. By paying small amount for design, you can be sure, the print will be useful without wasting bunch of material. ## 3D Printing Settings More specific settings will be in the attached files.

Files (2)