31-Day Dispenser for 3-Compartment Pill Boxes

Model Overview & Print Notes

Overview This model is a 31-day vertical organizer designed to hold standard daily pill boxes with three compartments. Each column is labeled Monday–Sunday and holds a stack of daily containers. Remove the bottom container and the next one drops into place. The unit can be placed on a desk or mounted to a wall using the built-in keyhole mounting slots. Compatibility Designed to fit pill boxes approximately: Length: ~101 mm Width: ~26 mm Height: ~31 mm Built-in tolerance allows for slight variation depending on brand and printer calibration. ## 3D Printing Settings Printing Instructions One-piece print Supports required (critical) Recommended layer height: 0.2–0.28 Walls: 2 walls is sufficient Infill: 3–5% is adequate (adjust as desired) Material: PLA or PETG recommended Usage Insert pill boxes from the top of each column Remove from the bottom to advance the stack Ensure smooth operation by removing supports cleanly Assembly No assembly required Optional wall mounting using screws with rear keyhole slots Notes Pill boxes are not included Designed for standard 3-compartment daily organizers Print quality and tolerances may affect fit

Files (1)