Model Overview & Print Notes

This is a 1x14 adjustable transfer tool designed for 4.5 mm gauge knitting machines. It is made by combining two 1x7 adjustable transfer tools, allowing you to quickly transfer 14 stitches at once – ideal for lace work, wide decreases, and speeding up repetitive operations. The model is fully modular, easy to assemble, and optimized for stable printing and long-term use on both hobby and professional knitting machines. ✔ Compatible with original 4.5 mm transfer needles ✔ Strong and precise PETG/PLA design ✔ Printable on any FDM 3D printer ✔ Two versions included: with and without the extra needle inserted during print 🧵 Compatibility Silver Reed: SK280, SK840, SK280, SK360 Brother KH 5**-9**сseries (4.5 mm models) Toyota 4.5 mm Knitmaster, Empisal 4.5 mm Other standard-gauge 4.5 mm machines 📂 Included: STL files: double_adjustable_base.STL double_adjustable_cover.STL double_adjustable_no_needle.STL Documentation: 1x14_Needles_Adjustable_Transfer_Tool.pdf (instructions) ## 3D Printing Settings 🖨️ Printing Recommendations Material: PETG recommended (PLA works too) Nozzle: 0.4 mm Layer height: 0.2 mm Walls: 4 Top/Bottom layers: 6–8 Infill: 25% or higher Supports: Everywhere Print orientation: As provided ⚙️ Special Printing Instructions For the version double_adjustable_base: ➡️ Pause the print before layer 25, insert the metal transfer needle, apply a small drop of glue if needed, then resume printing. A second file double_adjustable_no_needle is included; this version does not require pausing the print.