1/25th scale 69 Pro Street Chevy C10

Model Overview & Print Notes

Making this printable in 1/25th scale. But as a Pro Street Truck with chassis, interior etc. This is a work in progress. I will be adding files as I go along. I will also be including a stock version down the road. Original body design was made by by Alexby in 1/10th scale and meant for Traxxis (RC car/truck chassis). AMT did produce a 69 Chevy Fleetside but that kit is super rare these days. I included a photo of that kit. You just have to provide your own wheels and motor. For those who are looking for a stock interior. I came across these files for a Chevrolet Panel Truck 1970. It isn't free and is available in CGTraders or cults3d, author is Andrey Bezrodny @coachbuilder_ua A GMC grill for the front end can be found here https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/gmc-suburban-1972. Alternative grills for the Chevy can be found here https://cults3d.com/en/3d-model/game/late-60s-and-early-70s-chevy-truck-grill-1-25th-scale-night_stone_ Let me know if you require something to be added to the files. A zip file is also available if you just want a single download. **UPDATE: 10/18/25** Added long box version as requested by a member **UPDATE: 11/24/24** Added new files Rev A and one Rev B, cabs, doors, bed panels, hoods and roof have been thickened by .15mm and smooth out. Shout out to @furryfellah for the tip **UPDATE: 6/01/24** Added new files, cab, doors, hood has been thickened by .3mm. Zip files with "thickened" added. **UPDATE: 4/25/24** Added half chassis for those who have smaller printers. Also added a GMC Tailgate **UPDATE: 11/26/23** Added the original doors with window frame and rear doors with window frames. **UPDATE: 9/26/23** Added two versions of truck bed, one with license plate holder in roll pan and the other with no license plate. Both of these have thicker walls as per request. **UPDATE: 9/23/23** Revised the crewcab roof, Rev A **UPDATE: 9/18/23** Revised the front grills, apparently it was missing the vertical slats, Rev A. **UPDATE: 9/13/23** Reworked a few parts, all four inner door panels, console with cup holders and front seat, Rev. A **UPDATE: 9/10/2** Added rear valance panel license plate area delete, missing rear bumper and reworked the Ford 9" rearend, Rev B. Added 1 zip file for everything under the file name "1_25th_scale_69_Pro_Street_Chevy_C10" **UPDATE: 9/06/2** Finally completed this Truck, but you will have to provide your own engine and wheels **UPDATE: 5/21/22** My bad, when I created the tires, I had made them directional. So I added the corrected tires, all 4 files have been uploaded, Rev A for 15s and 17s **UPDATE: 5/08/22** Uploaded Rear tires, two sizes, first is a 15x15s and the second is 15x17s **UPDATE: 2/05/22** The model is about 85% completed, Some things were a bit frustrating. I'll will slowly add more files but it is still a work in progress. Added 3 types of Hoods, Stock, Cowl induction and Blower hood **UPDATE: 11/23/21** Made a set of pedals for this truck, original file came from https://www.thingiverse.com/thing:4655106 I modified it to use for this truck **UPDATE: 10/20/21** Not much of an update, but tweak the design for another option build. A Pro-street 69 four door C10 boulevard cruiser **UPDATE: 10/19/21** -Refined and corrected some areas of the truck bed, Rev F. -Reworked the tailgate to have it a little pronounced lettering, Rev A plus separated the latch as an additional piece so it can be painted a separate color -The rest of the parts are almost done. **UPDATE: 10/11/21** Uploaded Rev D, had to make clearance in the front of the truck bed for the frames to pass through **UPDATE: 10/10/21** Uploaded Rev C for the Pro Street truck bed. Thicker panels and prints good now in 1/25th scale **UPDATE: 10/09/21** Uploaded a revised truck bed, this time with wall supports, Rev B **UPDATE: 10/06/21** Revised the truck bed, made the walls a little thicker and smoother, Rev A for both Pro Street and stock beds. Also added the tailgate **UPDATE: 10/02/21** Added the tail lights and corrected the lens, Rev A has been uploaded. Uploaded file for the side markers as well **UPDATE: 9/25/21** Added the stock truck bed, this will have the options of stock hood, opened hood, cowl induction and Wall E Blower scoop ## 3D Printing Settings

Files (125)