Articulated Skeleton Crocodile

Model Overview & Print Notes

ℹ The teeth are a bit sharp, so please be careful! As you’ve probably noticed, the head can be attached, please be cautious when snapping the head on to avoid injury! ℹ Tips for printing: Filament: PLA Supports: No! Layer height: 0.16(0.15)mm or 0.2mm Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion! Info‼: Do not scale the Crocodile any smaller otherwise the connections will no longer work! Info‼: If you apply too much force to the connections they may break because the connections are small! Info‼: Please be careful when removing the Crocodile from the print bed! Info‼: Print as oriented! ------------------------------------------------------ ❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use. ------------------------------------------------------ Colors and filament I used (1 Color): PLA Matte / BoneWhite Or decide for yourself which colors and how many you want to use!

Print profiles